Threaded Inserts

Threaded inserts are nuts that have an internal thread and an external thread. The external thread of the threaded insert is screwed into a "worn out hole") and on the inside a functioning thread is now available again.

1. Threaded inserts
2. Our range of stainless steel threaded inserts - buy online in our online shop
3. The assembly of stainless steel threaded inserts
4. Similar websites around the topic threaded inserts

 

Threaded Inserts Stainless Steel V2A V4AThreaded inserts made of stainless steel or steel are an indispensable compensating element in maintaining the value of components or assemblies or workpieces. A threaded insert made of stainless steel protects companies from further large expenditures or costs or new production of components or workpieces. It is often the case that components on machines have to be disassembled for maintenance work or general overhauls and the screw connections are therefore exposed to extreme stress. If threads of screwed connections in workpieces or components are subjected to constant use (loosening and tightening), the threads are also subject to natural wear at some point. Here we are not only talking about the thread of the screw that suffers and fatigues, which is the lesser of two evils, but about the thread in the components. This often means the total loss of expensive assemblies. To prevent this, thread inserts made of either V2A or V4A are used. Once threads are destroyed, be it by overloading - by tightening too tightly or by whatever - the threads are often hopelessly destroyed. So it is not possible to simply drill new holes with the appropriate threads at other places. If there is a lack of space in the assemblies, it is often impossible to change to larger threads. This is where the thread inserts made of stainless steel, a cheap alternative to repair worn threads quickly and economically, come into use. The inserts with the thread made of stainless steel are made for it! If you would like to read more about stainless steel thread inserts, just visit our blog. Basically, it can be said that such threaded inserts are used exclusively in industry, but almost never in the private sector. Since the specific applications are always in components or workpieces.

Our range of stainless steel threaded inserts - buy online in our online shop

Threaded Inserts Stainless Steel V2A V4AFor several years we have been successfully supplying many companies who can buy a wide variety of products at low prices in our online shop, thus keeping downtimes and downtimes of technical equipment to a minimum. Short ways and fast order processing can be optimized by structured ordering processes, so we supply thousands of customers all over Europe with threaded inserts made of stainless steel in V2A or V4A. The thread inserts are part of our standard delivery program and we keep all parts in stock. Our stock program includes threaded inserts made of stainless steel V2A in the smallest size from M3 up to M20. Of course we also supply all intermediate sizes. These are M3 and M4, M5, M6 to M8 further over M10, M12 and M14 as well as M16 and M20. To make shopping even more secure for you, we decided a few years ago to convert the entire website to the secure SSL certificate. This makes it even safer to access the data when downloading it into our merchandise management system and third parties will no longer have access to the data. While we are already on the subject of security, we would like to briefly explain in this article how an order process in our shop has to be carried out exactly and which steps have to be taken so that the thread inserts can be ordered. First of all, please choose all the products you need. Once this process is complete, please place all items in the shopping cart provided. Once all items are in the basket, you will be asked to create a customer account so that your data can be placed in it. These are still needed for invoicing and as delivery address. Once you have entered your data, you will be asked to select the payment method. If the payment is completed, you will receive the order confirmation by mail from us. Afterwards your threaded inserts will be assembled and shipped in our warehouse.

The assembly of stainless steel threaded inserts

Correctly fitting stainless steel threaded inserts is not that difficult if you follow a few tricks and knacks. At the beginning the defective thread in the components must be drilled out with the correct core hole. In order to determine the correct core diameter of the new threaded insert, it is advisable to find out the respective core hole diameter of the new threaded insert in a table book. Once this is determined, the hole can be drilled out. Now the new, larger thread of the threaded insert (external thread) must be cut into the component using a thread cutter. Now the threaded sleeve is screwed into the component. Use a screw and a nut for this. Screw the nut onto the screw thread and then into the threaded insert. Now lock the nut against the threaded insert. The recess on the threaded insert must branch downwards, away from the screw. Apply a few drops of metal glue to the thread of the threaded insert and screw the insert into the component. The material can be plastic, aluminium and plastic and other soft materials. It is important that the threaded insert ends flush with the top edge of the component. Now loosen the lock nut of the screw and carefully unscrew the screw again. The adhesive of the threaded insert must now harden, then the component is ready for installation and the thread can be fully loaded again. Please give the adhesive enough time before a high load can take place.

 

Similar websites around the topic threaded inserts

  1. https://de.wikipedia.org/wiki/Gewindeeinsatz
  2. https://www.openthesaurus.de/synonyme/Gewindeeinsatz
  3. https://www.motor-talk.de/forum/suche-eine-lange-gewindereparaturbuchse-gewindeeinsatz-m8-x1-25mm-x-25-t5772997.html
  4. https://www.linguee.com/german-english/translation/gewindeeinsatz.html
  5. https://wikivisually.com/lang-de/wiki/Gewindeeinsatz
Page 1 of 1
Items 1 - 17 of 17

1,38 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,14 €
1000,98 €
5000,89 €
10000,81 €
100000,73 €
Product available: 31.12.2026
1,46 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,20 €
1001,04 €
5000,95 €
10000,86 €
100000,77 €
Product available: 31.12.2026
1,51 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,25 €
1001,07 €
5000,98 €
10000,89 €
100000,80 €
Product available: 31.12.2026
1,44 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,19 €
1001,02 €
5000,94 €
10000,84 €
100000,76 €
Product available: 31.12.2026
2,19 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
112,01 €
511,84 €
1011,71 €
2511,58 €
10011,49 €
Product available: 31.12.2026
3,34 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,75 €
1002,36 €
5002,17 €
10001,96 €
100001,77 €
Product available: 31.12.2026
4,89 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
254,02 €
1003,45 €
5003,17 €
10002,88 €
100002,58 €
Product available: 31.12.2026
9,13 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
257,52 €
1006,45 €
5005,90 €
10005,37 €
100004,83 €
Product available: 31.12.2026
11,53 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
259,67 €
1008,44 €
5007,82 €
10007,20 €
100006,58 €
Product available: 31.12.2026
26,42 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
2523,48 €
10021,53 €
50020,55 €
100019,58 €
1000018,59 €
Product available: 31.12.2026
2,33 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,92 €
1001,64 €
5001,51 €
10001,37 €
100001,24 €
Product available: 31.12.2026
3,39 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,80 €
1002,39 €
5002,18 €
10002,00 €
100001,80 €
Product available: 31.12.2026
4,61 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
253,94 €
1003,49 €
5003,26 €
10003,05 €
100002,82 €
Product available: 31.12.2026
3,33 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,74 €
1002,36 €
5002,15 €
10001,96 €
100001,76 €
Product available: 31.12.2026
7,84 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
256,35 €
1005,53 €
5005,07 €
10004,62 €
100004,15 €
Product available: 31.12.2026
5,26 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
254,33 €
1003,71 €
5003,40 €
10003,09 €
100002,78 €
Product available: 31.12.2026
7,44 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
256,13 €
1005,25 €
5004,82 €
10004,38 €
100003,94 €
Product available: 31.12.2026

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy Stainless Steel Threaded Inserts in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Steel Threaded Inserts now in our online shop

Hinweis / Note
Hinweis / Note