Press Clamps

Press clamps are used to place ropes around thimbles in maritime articles and to press them securely. Only press clamps solve the task safely and quickly to connect rope ends permanently and not detachable again. Press clamps are available in copper or stainless steel versions.

1. Press clamps
2. Our stock program of press clamps - Buy online in Online Shop
3. The production of press clamps for ropes, steel ropes and stainless steel ropes
4. Other websites related to the topic of copper and stainless steel press clamps

Are you currently looking for the right press clamps? Then you may have come to the right place. Press clamps are indispensable today in all possible areas of securing ropes and eyelets or thimbles needed to make one-time connections that are inseparable. Press clamps made of nickel-plated copper or press clamps made of stainless steel are disposable products that can securely connect ropes and loops of steel cables by adding a pressing device. Especially in the boat sector or in the maritime sector, steel ropes made of steel or stainless steel must always be securely fastened without the possibility of unintentional opening. In order to crimp a steel rope or a stainless steel rope made of steel wire, the steel rope must first be cut to the correct length. Once the steel rope has been cut to the correct length and the preparation for the press clamp has been completed, the end of the rope can be deburred. Once this has been done, the steel or stainless steel or copper press clamp can be slid over the rope. Now the end can be placed around the article to be fastened, like a thimble, and the end of the rope can be inserted together into the ferrule. If it is a thimble, the steel wire rope must now be pulled tightly around the thimble. Now the press sleeve or press clamp must be pressed firmly up against the thimble. Now there are two ropes inside the press sleeve made of steel or stainless steel. Now we come to the point where the Press Sleeve can be pressed together by the Press Sleeve Pliers. To do this, place the crimping sleeve pliers on the center of the crimping sleeve. If the pressing sleeve tongs are now correctly positioned, the actual pressing process which compresses the pressing sleeve can begin. During the actual pressing process, where the ferrule is now pressed firmly together, the ferrule is now plastically deformed in such a way that it wraps around the two ropes and, in the best case, the rope contours are transferred to the press clamp or ferrule. Now, due to these high forces, this condition is achieved so that the contours are transferred to the ferrule. After pressing, the ferrule is now firmly and securely attached to the ropes and can no longer be loosened. This press clamp connection is called a one-way connection. This connection is high-strength and can withstand high loads. Subsequent correction of the ropes after the press clamp has been firmly pressed is no longer possible. This connection can only be opened again by destroying it.

Our stock program of press clamps - Buy online in Online Shop

Press clamps stainless steel copper

As we have already mentioned, it is now impossible to imagine the boating industry without press clamps. In any application where steel cables must be pressed at the ends to allow a high stress, a press clamp made of copper or stainless steel or steel must be used. We created the category of press clamps some time ago so that we could offer you a wide variety of press clamps or press sleeves, each of which can be made of stainless steel, steel or even copper. These materials are the most important when it comes to crimping with press clamps for steel cables. In this paragraph, we would like to briefly show you how you can safely and quickly order your press clamps through our online store system. If you have found us by using the search engine and entering the search term stainless steel or copper crimping clamps, you will find an overview page that shows you all possible copper or stainless steel or steel press clamps. By the exact search function you can now select your press sleeve or press clamps. If you have found what you are looking for, select the correct number of pieces and place the crimping clamps in the shopping cart. If you would like to buy other products besides the press clamps, please search for them. You can use the search function above. Now open a customer account in our online store. To do this, enter your address and email. If this is done, go now to the shopping cart and further on the button "continue". You will now be forwarded with your products to the press clamps and can select the payment methods. To do this, you have different options for payment. Choose the best payment method for you. Before sending the purchase of your steel or stainless steel or copper clamps, please check again exactly whether the quantity and all data are correct. If everything is correct, you can now buy your press clamps cheap in our online store. After the purchase of your clamps, the order confirmation will be sent to you. After successful payment, the desired and ordered number of nickel-plated copper or stainless steel or steel clamps will be assembled in the warehouse and shipped to you ready for shipment.

The production of press clamps for ropes, steel ropes and stainless steel ropes

Press clamps stainless steel copperIn the last paragraph, we would like to give you a brief insight into how such press clamps made of nickel-plated copper or stainless steel or bollard boats yachts jetty stainless steel steel can be manufactured. Press clamps made of copper or stainless steel or steel are produced by forming or a rolling process. For this purpose, a rolling mill is set up so that the press clamps are inserted as strand material. The actual rolling process starts after all parameters have been loaded. If the start button is now pressed, the actual rolling begins. Different rolls are arranged one after the other. In the first rolling process, the raw strand of the future copper or stainless steel or steel press clamps is rolled. After that, the future press clamps now run through all rolls and the shape becomes visible. The oval round shape of the press clamps becomes visible after the last roller section. Now the future press clamps can be cut to the correct length. In the process, the oval tube is now cut off by a sawmill and falls into the containers provided in front of it: this is where all the untreated press clamps are collected. Once thousands of crimps have been collected, the crimps can be refined. This can be the nickel-plating of the surface of a copper ferrule or the nickel-plating of a steel surface of a ferrule. Once all the clamps are ready, they can be sorted into our warehouse. If your order comes in via our online store, we can now assemble and pack the finished crimp terminals in the warehouse. Then your ordered clamps will be shipped. A short time later, your mailboat can deliver your press clamps to you.
 

Other websites related to the topic of copper and stainless steel press clamps

  1. https://www.techniker-forum.de/thema/pressklemmen.101377/
  2. http://motorsaegen-portal.de/viewtopic.php?f=70&t=50980
  3. https://www.landtreff.de/schlageisen-fur-alu-presshulsen-t17655.html
Page 1 of 1
Items 1 - 12 of 12

0,75 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,62 €
1000,52 €
5000,49 €
10000,44 €
100000,39 €
Product available: 31.12.2026
0,84 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,69 €
1000,60 €
5000,55 €
10000,50 €
100000,44 €
Product available: 31.12.2026
1,56 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,29 €
1001,11 €
5001,01 €
10000,92 €
100000,82 €
Product available: 31.12.2026
1,21 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,00 €
1000,86 €
5000,79 €
10000,71 €
100000,64 €
Product available: 31.12.2026
2,56 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,11 €
1001,81 €
5001,65 €
10001,50 €
100001,36 €
Product available: 31.12.2026
0,39 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,35 €
1000,31 €
5000,30 €
10000,29 €
100000,26 €
Product available: 31.12.2026
0,21 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,18 €
1000,15 €
5000,14 €
10000,13 €
100000,12 €
Product available: 31.12.2026
0,48 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,39 €
1000,33 €
5000,31 €
10000,27 €
100000,25 €
Product available: 31.12.2026
0,94 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,77 €
1000,67 €
5000,61 €
10000,56 €
100000,50 €
Product available: 31.12.2026
1,45 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,20 €
1001,02 €
5000,94 €
10000,86 €
100000,77 €
Product available: 31.12.2026
1,92 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,57 €
1001,34 €
5001,24 €
10001,12 €
100001,01 €
Product available: 31.12.2026
8,25 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
256,79 €
1005,82 €
5005,34 €
10004,86 €
100004,37 €
Product available: 31.12.2026

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy Press clamps in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Press clamps now in our online shop

Hinweis / Note
Hinweis / Note