Large Washers

Large washers can be used as cover panes in car body construction. As a result, Large Washers can perfectly cover and close large holes. The material used for Large Washers is almost always stainless steel or normal steel.

1. Large washers
2. Our delivery program of large washers - buy online in our Online Shop
3. The production of large washers with a hole or the hole in the middle
4. Similar websites on the subject of large stainless steel washers
 

Washers are colloquially referred to as " large washers" and this article will deal with the large washers, i.e. the washers. We would like to give you some information about the washers with a hole or a hole in the middle. Such large washers are nowadays used thousands of times a day in all kinds of industry and trade, i.e. in the construction and roofing sectors. But for what can companies and also more and more private users use such large washers in a sensible way? These questions and many more are being put to the test today and of course we are also talking about our stock of large washers and the materials used in their manufacture. Apropo production. This will be the last section in this chapter, in which we would like to give you a few words about the production of such large washers with a hole or bore, the manufacturing process a little bit closer. But we would like to start with the application. Large discs with a hole or a hole in the middle are nowadays fastener additives which are important for certain applications. Let us assume you want to fasten a wooden construction outdoors securely and firmly using long screws. Since wood is a rather soft material, the screw head would mercilessly sink into the soft wood material when you tighten the screws. This is exactly where the large washers come into play. A washer with the hole or bore is placed under the screw head and a large washer is placed under the nut. Now the joint can be tightened without the screw head and the nut of the screw sinking into the wood and leaving no real portable connection. The pressure from the narrow edge of the screw head is now diverted through the washer with the large rim so that it is distributed over the surface of the large washer. The basic principle is to use large washers to securely screw soft materials such as wood or plastics. But also to make it possible to use them for a screw connection on car bodies, for example, where holes are rusted through. This large hole of the body can now be covered by the large washer, i.e. the body washer, and then tightened with the screws. This would not be possible with a standard washer. As a rule, the materials used for large washers are always the normal mild steel or, for processing outdoors or in damp rooms, always V2A or V4A stainless steel if the large washers are to be used near the coast in the vicinity of salt water.

Our delivery program of large washers - buy online in our Online Shop

Large Washers Stainless Steel V2A V4AEspecially in the body shop (large washers), where thousands of cars are processed and repaired every day, large body washers made of stainless steel are constantly and increasingly in use. So people are looking for a cheap way to buy such large stainless steel large washers and have them sent to their homes. Due to the increasing demand, all online shops that offer large washers must of course also ensure that the demand can be met. For this reason we have decided to include the large washers in our product catalogue, so that we can make these large stainless steel washers available to our customers from Germany and the rest of Europe quickly and in large quantities. In order to make sure that everyone can run safely, it has become even more important that the topic of security is not underestimated and so we were able to successfully convert our Dormain to the encrypted version of the SSL certificate. This is the only way to ensure that all your data, which you deposited when you bought your inexpensive large stainless steel panes, is transferred securely to our merchandise management system. Data access by third parties is now largely excluded and makes shopping for the large stainless steel large washers and all our other products even more convenient. In this context we would like to say a few words about the correct and fast ordering process, so that you can complete your purchase of the large stainless steel large washers quickly and safely. Of course, we also assume that you have found us via a major search engine and that you have found us by entering the search word "large washers" in our category. Just right, you can now choose the suitable stainless steel large washers at your leisure and add them to your shopping cart in the quantity you require. Afterwards you can buy further products or complete the purchase of your large washers. If you would like to complete your purchase now, please create an account with us. Log in and put down all missing data. If everything is filled in, you can now go back to the shopping cart where your large discs with the hole are and please check your order again. If everything is correct, follow the instructions and after a few clicks you will be shown the payment option. Choose and pay your large washers. If the process was successful, you will receive an order confirmation with all important details.

The production of large washers with a hole or the hole in the middle

Large Washers Stainless Steel V2A V4AIn the last section we would like to briefly touch on how the production or manufacture of large washers or washers can be carried out and how an economical production can be implemented today. In the past, large washers were produced on old and rather slow punching machines. But the problem was that the production process was often quite slow, because these mechanically driven machines were only driven mechanically and did not have a CNC control. Today this is all different. Today such large discs are exclusively punched on pure CNC machines. The only thing that has to be done is to equip the machine with the right tools. In order to punch such large washers quickly and sensibly, hardened punching tools are used. One tool is movable at the top and the counter tool is under the table at the bottom. The table with the stainless steel plate is then moved back and forth so that the punching tool can punch out the large washers. Often, for the reasons of economy mentioned above, the punching machine is coupled by means of a loader, which during operation places the new steel plates into the punching machine and pulls the old stainless steel plates off the table of the machine. This is the only way to further increase the economic efficiency of punching large washers with a single hole quickly and cost-effectively. This punching process of the large discs is repeated a thousand times until there are enough large washers in the collection container. Now they can be packed in cartons and wait in the warehouse until you order your large stainless steel large washers from our online shop. Then we can quickly pack the goods and make them ready for dispatch and send them to you.
 
 

Similar websites on the subject of large stainless steel washers

  1. https://www.dict.cc/forum-questions/detail-244979-Karosseriescheiben.html-grosse Scheiben
  2. https://www.motor-talk.de/forum/elektrische-heckklappe-t3359189.html?page=38-große Scheiben
  3. https://www.racing4fun.de/forum/viewtopic.php?t=28670-große Scheiben
Page 1 of 2
Items 1 - 25 of 36

0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,07 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,06 €
1000,05 €
5000,05 €
10000,04 €
100000,04 €
Delivery time on request
0,07 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,06 €
1000,05 €
5000,05 €
10000,04 €
100000,04 €
Product available
0,14 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,12 €
1000,11 €
5000,10 €
10000,08 €
100000,07 €
Delivery time on request
0,24 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,19 €
1000,17 €
5000,15 €
10000,14 €
100000,13 €
Product available
0,32 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,26 €
1000,23 €
5000,21 €
10000,19 €
100000,17 €
Delivery time on request
0,43 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,36 €
1000,30 €
5000,27 €
10000,25 €
100000,23 €
Delivery time on request
0,69 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,57 €
1000,49 €
5000,45 €
10000,40 €
100000,37 €
Delivery time on request
0,79 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,64 €
1000,55 €
5000,50 €
10000,46 €
100000,42 €
Delivery time on request
1,43 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,18 €
1001,01 €
5000,93 €
10000,84 €
100000,76 €
Delivery time on request
5,90 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
254,86 €
1004,17 €
5003,82 €
10003,47 €
100003,12 €
Delivery time on request
4,25 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
253,50 €
1003,00 €
5002,75 €
10002,50 €
100002,25 €
Delivery time on request
10,34 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
258,68 €
1007,56 €
5007,01 €
10006,45 €
100005,89 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,06 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,05 €
1000,05 €
5000,04 €
10000,04 €
100000,04 €
Delivery time on request
0,13 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,11 €
1000,10 €
5000,08 €
10000,08 €
100000,07 €
Delivery time on request

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy Stainless Steel Large Washers in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Steel Large Washers in our online shop