Slices

Slices are essential for screwed connections. In a gliding screw connection, Slices are placed under the head of the screw and also a washer under the nut of a screw connection. Slices are always made of steel or stainless steel.

1. Slices
2. Which different slices are available?
3. Further safety elements from the family of slices
4. Our delivery program of steel and stainless steel slices - buy online in our online shop
5. Further links on the subject of slices
 

Slices are truly indispensable little helpers that make life perfect in the vast realm of fasteners. No screw connection can do without the use of Slices. There is of course a reason for this. Because in industry, where thousands of Slices are processed every day, Slices must reduce surface pressure and secure component connections against unintentional opening. Bolted connections that can be made using screws, threaded rods or threaded bolts are only industrially prescribed and complete connecting elements when there are Slices and nuts in every bolted connection. However, these locking or connecting elements have not only established themselves in industry, but - or even more frequently - in the private sector. Hardly any house builder can do without the right screw connections, such as screws, nuts and Slices. But also other areas are covered with these locking elements, such as model making, which needs all parts in smallest versions to create detailed reproductions. As you can see, Slices from our modern times can no longer be subdivided, because they have become an integral part of industry and private life. If you would like to read more about the subject of Slices, then please visit our blog post on this subject.

Which different slices are available?

Slices Stainless Steel V2A V4ASlices and lock washers in stainless steel have the task of making screw connections as secure as possible so that loosening of the connection is not challenged by vibrations. A nut that is attached to a thread should always be underlaid with a lock Slices. This washer claws with the inclined ends of the safety Slices once into the upper side of the nut and on the other side into the component or the Slices and thus prevents loosening. The connection can only be loosened with a noticeable resistance if you want to unscrew the nut with an open-end wrench. As mentioned above, Slices are always found in connection with a screw connection. A Slices will never appear without a screw connection and vice versa. Washers are always located between the firmly locked screw connections and the nuts at the end of the thread. Slices also prevent scratches caused by turning the nut on the component and increase the surface pressure on soft materials in order to prevent the screws from being pressed in.

Further safety elements from the family of slices

Slices Stainless Steel V2A V4AAnother group that cannot be dispensed with is the extra thick steel slices. These steel slices can be installed similarly to spacer sleeves or spacer sleeves or spacers on technical equipment. They are extremely stable and have a thick steel body that can absorb extremely high pressure. The rosettes, which are usually made of solid metal, are also indispensable in mechanical engineering together with the slices and spring slices and are mainly used on hoods of technical equipment or in railing construction. The stainless steel wedge slices are specially manufactured steel wedges made of stainless steel with a fixed angle corresponding to the legs of U-beams and double T-beams. They compensate for the angle on the legs of the steel beams in order to fix screw heads straight through and through without damaging the connection by lateral pressure. The same applies to spherical slices and conical cups, which, due to their design, always compensate for components by means of screw connections that must be installed absolutely free of tilt. Like spring slices, lock washers are just as important in all branches of mechanical engineering and industry and are also used in thousands of screw connections every day. This also applies to shim slices, which have the same positional value as slices and spring washers and are indispensable for the transmission of torque in mechanical engineering and model making.
 

Our delivery program of steel and stainless steel slices - buy online in our online shop

Slices Stainless Steel V2A V4AOur delivery program of slices made of steel or even stainless steel V2A and also V4A includes the most different types of slices. We stock slices for screws of M3, M4, M5, M6, M8 and M10, M12, M14, M20, M24, M27, M30 and other sizes of slices. The same applies to spring slices as well as washers or K-washers for various applications. Our warehouses are always largely filled with all kinds of materials that are needed daily in industry and trade to ensure a fast response time when shopping in our online shop. To enable a fast order process in our shop, please put all required parts into the shopping cart and then choose your preferred payment option to complete the order process. You will then receive an order confirmation by e-mail after the successful order. When we have received your order, we will put the goods together and hand them over to the responsible transport company to ensure a fast delivery of the goods to your company.

 

Further links on the subject of slices

  1. https://de.wikipedia.org/wiki/Scheibe
  2. https://de.wikipedia.org/wiki/Unterlegscheibe
  3. https://de.wikipedia.org/wiki/Scheibe_(Begriffsklärung)
Body Washers

Body washers are large windows that can easily cover large holes in a vehicle. Body washers are therefore perfect in use and quickly placed. Steel or stainless steel is always used in the...

Countersunk Washers

Countersunk Washers are underlays that are packed under countersunk washers. The Countersunk Washers then increases the contact pressure and thus, for example, plastic cladding can be fixed well....

Disc Springs

Disc springs are springs that are constructed like a disc. Such disc springs are convex in the middle and are always mounted opposite each other. The material used in the production of disc...

Fender Washers

Fender washers are installed on mudguards. Due to the size of the Fender washers it is possible to cover also rust spots without any problems. Fender washers are basically made of steel or...

Flat Washers

Flat washers are medium-sized discs that can cover holes well. This is easy to do with Flat washers by packing them above and below the large bore and pressing the Flat washers together with a...

Large Washers

Large washers can be used as cover panes in car body construction. As a result, Large Washers can perfectly cover and close large holes. The material used for Large Washers is almost always...

Shim Washers

Shim Washers are discs which compensate for axial play within a shaft or axle. Shim Washers are used to minimise backlash until all components fit perfectly. Steel or stainless steel is used in...

Shims

Shims are all washers that are placed under a screw connection. Such shims prevent the screw head from being "pressed" into the structural detail or the material. Steel or stainless steel Shims...

Spherical Washers - Conical Seats

Spherical washers and conical seats belong together and can thus perfectly balance components that need to be joined. Spherical washers and conical seats are Siamese twins due to their shape and...

Square Washers

Square washers are not round but square. Such square washers are mainly used in timber construction to provide the screw head with a large bearing surface. Especially with soft material such as...

Steel Washers

Steel washers are used and installed in steel construction. Steel washers can therefore be placed under or between beams and screwed on tightly. Steel or stainless steel is used as material for...

Support Washers

Support washers are discs made of steel or stainless steel. These support washers are installed as axial play compensation in gearboxes or on axles or shafts. The axial play is minimized by using...

Underneath Washers

Underneath Washers that are inserted under screw connections to further increase the contact surfaces. These Underneath Washers protect the material below. Underneath Washers are almost always...

Washers

Washers have the name because they belong under every bolt connection. A washer distributes the pressure under the head of the bolt to such an extent that a flat pressure is created. Steel or...

Wedge Washers

Wedge Washers are shims that can compensate for certain angles. So Wedge Washers are perfectly made for this and are always cut at an angle. Steel or stainless steel is always used in production....

Page 1 of 10
Items 1 - 25 of 227

0,35 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,29 €
1000,24 €
5000,23 €
10000,20 €
100000,18 €
Delivery time on request
0,45 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,37 €
1000,32 €
5000,29 €
10000,26 €
100000,24 €
Product available
0,39 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,32 €
1000,29 €
5000,26 €
10000,24 €
100000,21 €
Delivery time on request
0,61 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,50 €
1000,43 €
5000,39 €
10000,36 €
100000,32 €
Delivery time on request
0,45 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,38 €
1000,32 €
5000,30 €
10000,27 €
100000,24 €
Delivery time on request
0,93 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,76 €
1000,65 €
5000,60 €
10000,55 €
100000,49 €
Delivery time on request
0,96 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,80 €
1000,68 €
5000,63 €
10000,57 €
100000,51 €
Delivery time on request
1,07 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,88 €
1000,76 €
5000,69 €
10000,63 €
100000,57 €
Delivery time on request
1,61 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,32 €
1001,13 €
5001,04 €
10000,94 €
100000,84 €
Delivery time on request
3,32 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,74 €
1002,34 €
5002,15 €
10001,95 €
100001,76 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
0,98 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,80 €
1000,69 €
5000,63 €
10000,57 €
100000,51 €
Product available
1,17 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,96 €
1000,82 €
5000,76 €
10000,69 €
100000,62 €
Product available
0,32 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,26 €
1000,23 €
5000,21 €
10000,19 €
100000,17 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Product available
0,31 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,25 €
1000,21 €
5000,20 €
10000,18 €
100000,17 €
Product available
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
1,13 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,93 €
1000,80 €
5000,74 €
10000,67 €
100000,60 €
Product available
1,20 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,99 €
1000,86 €
5000,79 €
10000,71 €
100000,64 €
Delivery time on request
0,35 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,29 €
1000,25 €
5000,23 €
10000,20 €
100000,19 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Product available
0,73 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,61 €
1000,51 €
5000,48 €
10000,43 €
100000,39 €
Delivery time on request
0,04 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,04 €
1000,02 €
5000,02 €
10000,02 €
100000,02 €
Delivery time on request
1,25 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,04 €
1000,88 €
5000,81 €
10000,74 €
100000,67 €
Product available
1,46 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,20 €
1001,04 €
5000,95 €
10000,86 €
100000,77 €
Product available

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy Stainless Steel Slices in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Steel Slices in our online shop