Swageless Fork Terminals

Swageless Fork terminals are connecting elements that are mainly used in railing accessories. However, such swageless fork terminals can also be found in other areas of steel construction. Also on boats and yachts swageless fork terminals are used for bracing.

1. Swageless Fork Terminal
2. Our delivery program of stainless steel swageless fork terminals - V4A or V2A - Buy online at our online shop
3. Production of the swageless fork terminals
4. Further websites around the topic swageless fork terminals

 

Stainless steel swageless fork terminals are certainly one of the best known terminals in the large family of fastening elements for steel cables. This article will focus exclusively on the application and construction of swageless fork terminals, so that even laypersons can quickly see what a stainless steel swageless fork terminals has to achieve and for what use such a terminal was designed. When we talk about a swageless fork terminals made of steel or stainless steel, we are always talking about rope holders which then serve as a transition piece and can be attached to a flat steel or a ring. Now it is the case that a swageless fork terminals always has two different sides. One side has a union nut with a clamping sleeve. The other side of the swageless fork terminals is constructed in such a way that there is a milled recess here, which can then be guided through a bolt and a retaining ring and hooked in. This milling on a swageless fork terminals gives the terminal its name. There is a fork on its side. The side with the union nut and the clamping sleeve inside serves exclusively as a steel cable holder and for clamping or crimping the clamping sleeve when the union nut is tightened slowly and firmly with a ring spanner or open-end spanner. At this moment the clamping sleeve with the longitudinal slot begins to press itself into the cone of the union nuts and the steel cable in the clamping sleeve of the swageless fork terminals is now slowly pressed against the wall of the clamping sleeve. If the pressure continues to increase as the union nut is tightened, the clamping sleeve receives the impressions of the steel cable and the clamping friction or static friction increases. If the union on the swageless fork terminals is so tight that nothing works anymore, the steel cable can under no circumstances be pulled out of the swageless fork terminals. If the connection between the steel cable and the swageless fork terminals is loosened at a later point in time, this can be easily done by opening the union nut on the swageless fork terminals. The opposite side on a swageless fork terminals is designed by the Gebel in such a way that by removing the pin the swageless fork terminals can now be attached to a flat steel with the hole. If the position of the swageless fork terminals is optimal, the socket pin can now simply be pushed through and made unattachable by securing the ring. Disassembly of the swageless fork terminals is also possible without any problems. Stainless steel is always used as the material for swageless fork terminals. That means the V2A or equal the V4A. In order to prevent permanent corrosion, the surface is often still polished. V4A stainless steel with swageless fork terminals is always the means of the choice, because swageless fork terminals are often used on boats and yachts.

Our delivery program of stainless steel swageless fork terminals - V4A or V2A - Buy online at our online shop

Swageless Fork Terminals Stainless SteelSwageless Fork terminals made of stainless steel have proved their worth in previous years, especially in railing construction and in boat and yacht building, and I pick up all possible steel cable ends and connect them permanently and effectively with a Swageless Fork terminals. Of course, this connection can be released at any time and can also be attached to other ropes later. Exactly this circumstance makes the Swageless Fork terminals so interesting for many applications in the industry and meanwhile also in private applications. For this reason, demand has continued to rise in recent years, so that the online business and online shops in particular have to keep sufficient Swageless Fork terminals in stock to ensure a smooth flow between the trade and the processing industry in the long term. For this reason, we have also included stainless steel Swageless Fork terminals in our range. Thus we offer to our customers from all over Europe the possibility of the purchase of your Swageless Fork terminals favorably over our on-line Shop. Now you have the possibility to buy our products 24 hours via our online shop. So that also the topic security does not come too briefly, we have decided to convert the entire domain to the safe SSL certificate. That creates still more data security with the purchase of your Swageless Fork terminals and your data are transferred thus surely to our enterprise resource planning, without which third can seize these sensitive data. Let us also take this opportunity to say a few words on the subject of the correct ordering process when shopping your Swageless Fork terminals. Have you and also found because you entered the search word "Swageless Fork terminals" via a search engine? Then you are already in the right category and can select the appropriate Swageless Fork terminals for you and put them in the right quantity in the shopping basket. If this first order process is completed, you can now purchase further products from our website or complete the order or purchase of your Swageless Fork terminals. To do this, log into our account and enter all your data, such as email and delivery address. Now go back to the shopping cart and click until you are offered a selection of payment options. Select the correct payment and pay the Swageless Fork terminals. If the payment process was successful, you will receive an order confirmation. Now also we can make your order of the Swageless Fork terminals ready for dispatch and dispatch to you. After some days the order of the Swageless Fork terminals should arrive with you.

Production of the swageless fork terminals

Swageless Fork Terminals Stainless SteelAs always, the last section will also deal with the production of a stainless steel swageless fork terminal. We would like to give you a brief introduction to the manufacturing process of swageless fork terminals, so that you too can get an idea of the highly economical way in which production can be carried out on CNC machines today. It is the case that the pure production is only carried out using CNC lathes, because only in this way is the production on swageless fork terminals guaranteed. Due to the reduced set-up costs, it has also become possible that the lot sizes have become smaller without the price being cancelled out by the long set-up costs. Today, each of the individual CNC machines is designed in such a way that unmanned operation is also possible and can be carried out at night. This means that the connected loader can commutate with the machines and provide the raw material for the swageless fork terminals whenever the need arises. Once the machine has been set up and the entire CNC program for parameterizing the swageless fork terminal has been loaded, production can begin. At the beginning, the basic body of the swageless fork terminal is always turned. The first step is to mill in the galel using a side milling cutter. Then the lateral drilling of the fork hole, into which the pin later comes, takes place. Now the thread for the union nut can be turned on the swageless fork terminal. In the second part, the union nut itself is made. The cone is screwed into the union nut. Once this is completed, the swageless fork terminal collet is the last to be manufactured. This is also milled in and drilled out inside. Once enough individual parts are finished, the swageless fork terminal can be assembled. If enough parts are assembled, all swageless fork terminal are stored in our warehouse and are now waiting for your order. Then the parts can be made ready for dispatch and sent to you. After some days all ordered swageless fork terminal should arrive with you.

 

Further websites around the topic swageless fork terminals

  1. https://forum.yacht.de/archive/index.php/t-141315.html-gabelterminal
  2. https://www.boote-forum.de/showthread.php?t=191202-gabelterminal
  3. https://www.boote-forum.de/showthread.php?t=185441&styleid=3)gabelterminal
 
Page 1 of 1
Items 1 - 1 of 1

16,79 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
1014,43 €
5013,57 €
10012,48 €
Product available: 31.12.2026

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy stainless steel Swageless Fork Terminals in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Swageless Fork Terminals now in our online shop

Hinweis / Note