Spherical Washers - Conical Seats

Spherical washers and conical seats belong together and can thus perfectly balance components that need to be joined. Spherical washers and conical seats are Siamese twins due to their shape and belong together as a SET. Steel or stainless steel is used in the production of Spherical washers and conical seats.

1. Spherical washers - conical seats
2. Our range of Spherical washers - conical seats - buy online in our online shop
3. The assembly of Spherical washers - conical seats
4. The production of Spherical washers - conical seats made of stainless steel
5. Similar websites around the topic Spherical washers - conical seats

 

Spherical Washers Conical Seats Stainless Steel V2A V4AAll Spherical washers and conical seats made of stainless steel or steel are not directly part of the fastening elements but of the compensating elements. This means that Spherical washers and conical seats must actually always be installed in pairs. Thus they are inseparable - like sisters and brothers - two units that can only act together as compensating elements. They thus always form a unit, because each disc cannot be used on its own on an assembly so that it can effectively fulfil its purpose for which it was designed. Spherical washers and conical seats are actually used exclusively in mechanical engineering or in special machine construction. They are therefore always used on technical equipment when compensating elements have to be installed to prevent tension between several parts during fastening. If two separately installed components are to be connected with each other and flat surfaces are screwed together, this is never possible without tensions. This is related to the fact that two surfaces in mechanical engineering have to be joined together, which are also already firmly connected to other components - always show minimal deviations. Be it manufacturing tolerances or installation tolerances. The Spherical washers and conical seats were developed precisely for this purpose. These two pairs are screwed between the components - which must be joined together without stress. The design of the Spherical washers and conical seats made of stainless steel makes it easy for the pairs to compensate for angle changes between the components. These Spherical washers and conical seats are actually only ever used in stainless steel V2A or V4A on plants and machines. As these alloys prevent corrosion and therefore have a very long service life. If you would like to know more about spherical washers and conical cups, please read our blog article on this subject which you will find in our blog.

Our range of Spherical washers - conical seats - buy online in our online shop

Spherical Washers Conical Seats Stainless Steel V2A V4AWe supply customers throughout Europe with Spherical washers and conical seats made of stainless steel by placing orders via our online shop. We supply these Spherical washers and conical seats in all standard sizes used in industry. These are M5, M6, M8, M10, M12 to M14 and M16 as well as M20. Our smallest Spherical washers and conical seats are made of V2A with a thread diameter of 6 mm and the largest diameter is 20 mm. The smallest sizes of the Spherical washers and conical seats made of stainless steel V4A are 6 mm and the largest diameter is 20 mm. Of course we also supply all intermediate sizes which are needed in the industry. In order to enable you to make a secure purchase in our online shop, our web platform was converted to a secure SSL certificate some time ago. This means that when you buy your Spherical washers and conical seats, your data is secure on our server. Especially when your sensitive data is entered via the interface and later your order is transmitted to us, everything is now secure. We would also like to explain to you briefly how you can make your purchases via our web portal. During the ordering process, you place your Spherical washers and conical seats in the shopping basket. It does not matter whether you need small quantities or larger quantities of shims. Once all items are selected, the next step is to choose the best payment option for you. Once you have decided, follow the instructions and you will be redirected to the secure payment module of our supplier. If your purchase was successful, you will then be taken back to our website, where an automatic order confirmation will be sent to you. If we receive your purchase shortly thereafter, the goods will be assembled and prepared in our warehouse to be delivered to the shipping company. If this process has been completed, you should receive your order within the next few days.

The assembly of Spherical washers - conical seats

Spherical Washers Conical Seats Stainless Steel V2A V4AWhen mounting Spherical washers and conical seats, there are some things to be considered. With this article we would like to sell you not only the products in our shop, but also give you some tips to mount the goods correctly. This is important to us! If you have the elements or components that you want to connect with the compensating elements, it is imperative that you clean all surfaces with an appropriate cleaning agent. The surfaces must be prepared for assembly. This means that all screw-on surfaces that come into contact with these shims must be 100% smooth and without burrs. A horizontal surface is essential! The shims must not wobble or wobble on the surface! Now move the parts to be connected so close together and carefully insert the first pair of Spherical washers and conical seats. Now insert the first screw through all holes and these elements. Now tighten the screw only hand-tight. Now do the same with the shims on the opposite side of the fastening and screw in the screw hand-tight. Now comes the moment when you have to tighten the screws carefully. Make sure that only a little bit is turned and then the opposite screw. Always proceed alternately when tightening the screws! This is extremely important in order to avoid tensions within the Spherical washers and conical seats. This is the only way to ensure successful installation of these elements. If, after tightening, all parts can be moved easily, there is no tension whatsoever during installation!

The production of Spherical washers - conical seats made of stainless steel

Spherical Washers Conical Seats Stainless Steel V2A V4ANormal CNC lathes are used for the production of Spherical washers and conical seats made of stainless steel. These machines are usually equipped with a loading system where the raw material is prepared. The CNC machine is then programmed by means of the CNC program for the sequence. When the machine starts up, the raw bars are transported into the lathe chuck and clamped. Afterwards the drilling of the Spherical washers and conical seats takes place. Then the spherical shapes are turned on the discs. When all these steps are completed, the material is cut off by means of the cutting tool. Now the turning process and the production on the machine is finished. Now the individual elements are hardened so that they are not too soft when tightened between the components. During the hardening process, the discs are heated in a furnace until all of them are red hot and then the rapid quenching takes place in an oil bath or water bath. Now the hardening process is complete. The Spherical washers and conical seats made of stainless steel are ready and can now be sold.

 

Similar websites around the topic Spherical washers - conical seats

  1. https://de.wiktionary.org/wiki/Kugelscheiben Kegelpfannen
  2. https://de.wikipedia.org/wiki/Kugelsegment Kugelscheiben Kegelpfannen
  3. http://de.dictindustry.com/deutsch-englisch/kugelscheiben Kegelpfannen
  4. http://de.dictindustry.com/deutsch-spanisch/kugelscheiben kegelpfannen
  5. https://www.openthesaurus.de/synonyme/Kugelscheiben Kegelpfannen
  6. https://de.wikipedia.org/wiki/Kugelpfanne Kugelscheiben
Page 1 of 1
Items 1 - 22 of 22

1,17 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,96 €
1000,82 €
5000,76 €
10000,69 €
100000,62 €
Product available: 31.12.2026
0,79 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,65 €
1000,56 €
5000,51 €
10000,46 €
100000,42 €
Product available: 31.12.2026
1,31 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,07 €
1000,92 €
5000,84 €
10000,76 €
100000,69 €
Product available: 31.12.2026
1,81 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,49 €
1001,27 €
5001,17 €
10001,06 €
100000,95 €
Product available: 31.12.2026
5,85 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
254,82 €
1004,13 €
5003,78 €
10003,44 €
100003,11 €
Product available: 31.12.2026
2,21 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,82 €
1001,56 €
5001,44 €
10001,31 €
100001,18 €
Product available: 31.12.2026
1,11 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,92 €
1000,79 €
5000,71 €
10000,65 €
100000,58 €
Product available: 31.12.2026
1,69 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,39 €
1001,19 €
5001,09 €
10001,00 €
100000,89 €
Product available: 31.12.2026
2,19 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,81 €
1001,55 €
5001,42 €
10001,29 €
100001,17 €
Product available: 31.12.2026
2,19 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,80 €
1001,55 €
5001,42 €
10001,30 €
100001,15 €
Product available: 31.12.2026
2,73 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,24 €
1001,93 €
5001,76 €
10001,61 €
100001,44 €
Product available: 31.12.2026
1,02 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,84 €
1000,73 €
5000,67 €
10000,61 €
100000,55 €
Product available: 31.12.2026
1,17 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
250,96 €
1000,82 €
5000,75 €
10000,69 €
100000,62 €
Product available: 31.12.2026
1,37 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,13 €
1000,96 €
5000,88 €
10000,81 €
100000,73 €
Product available: 31.12.2026
1,79 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,48 €
1001,26 €
5001,15 €
10001,05 €
100000,95 €
Product available: 31.12.2026
2,27 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,87 €
1001,61 €
5001,48 €
10001,33 €
100001,20 €
Product available: 31.12.2026
2,39 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,98 €
1001,69 €
5001,55 €
10001,42 €
100001,27 €
Product available: 31.12.2026
1,26 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,04 €
1000,89 €
5000,82 €
10000,74 €
100000,67 €
Product available: 31.12.2026
1,94 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,59 €
1001,37 €
5001,26 €
10001,14 €
100001,02 €
Product available: 31.12.2026
2,36 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
251,94 €
1001,67 €
5001,52 €
10001,38 €
100001,25 €
Product available: 31.12.2026
2,55 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,11 €
1001,80 €
5001,65 €
10001,50 €
100001,36 €
Product available: 31.12.2026
3,50 €

including 19% VAT. , plus shipping (Standard)

FromPrice per unit
252,88 €
1002,48 €
5002,26 €
10002,06 €
100001,86 €
Product available: 31.12.2026

EDELSTAHLDEPOT • Moebus Steel Design • Im Wüstfeld 21 • Germany • D-64859 Eppertshausen

Buy Stainless Steel Spherical Washers - Conical Seats in our online shop - prompt shipping ✓ up to 30% reduced ✓ smallest packaging units possible ✓ top prices ✓ Buy Steel Spherical Washers - Conical Seats in our online shop

Hinweis / Note